6015 bearing: 75 × 115 × 20 mm
Bearings › 6015
A 6015 is a deep groove ball bearing, 75 mm bore, 115 mm outside diameter, 20 mm wide. Variants: 6015-2RS (rubber sealed), 6015-ZZ (metal shields), 6015 open.
| Bore | 75 mm |
|---|---|
| Outside diameter (OD) | 115 mm |
| Width | 20 mm |
| Dynamic load rating C | 41.6 kN |
| Static load rating C0 | 33.5 kN |
| Limiting speed | 7 500 r/min |
| Weight | 0.631 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6015. Limiting speed as SKF gives it.
Open 6015 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
0 | Extra-light series |
15 | Bore 15 × 5 = 75 mm |
Ask for
- 6015-2RS: rubber sealed both sides. Other brands: SKF 6015-2RSH, FAG 6015-2RSR, NSK 6015DDU, NTN 6015LLU, Koyo 6015-2RS.
- 6015-ZZ: metal shields both sides. Other brands: SKF 6015-2Z, FAG 6015-2ZR, NSK 6015ZZ, NTN 6015ZZ, Koyo 6015ZZ.
- 6015: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 60 series
Same bore as the 62, but thinner. A smaller OD and narrower. Used where there's no room: gearbox layshafts, small rollers, fans, power tools.
Lighter load than a 62. Don't swap a 60 into a 62's place with a sleeve to make it fit; it'll fail long before the 62 would.
Same bore, different size
One size up or down
Every bearing 75 × 115 × 20 mm: 75 × 115 × 20 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.