6215 bearing: 75 × 130 × 25 mm
Bearings › 6215
A 6215 is a deep groove ball bearing, 75 mm bore, 130 mm outside diameter, 25 mm wide. Variants: 6215-2RS (rubber sealed), 6215-ZZ (metal shields), 6215 open.
| Bore | 75 mm |
|---|---|
| Outside diameter (OD) | 130 mm |
| Width | 25 mm |
| Dynamic load rating C | 68.9 kN |
| Static load rating C0 | 49 kN |
| Limiting speed | 6 700 r/min |
| Weight | 1.16 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6215. Limiting speed as SKF gives it.
Open 6215 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
2 | Light series |
15 | Bore 15 × 5 = 75 mm |
Ask for
- 6215-2RS: rubber sealed both sides. Other brands: SKF 6215-2RSH, FAG 6215-2RSR, NSK 6215DDU, NTN 6215LLU, Koyo 6215-2RS.
- 6215-ZZ: metal shields both sides. Other brands: SKF 6215-2Z, FAG 6215-2ZR, NSK 6215ZZ, NTN 6215ZZ, Koyo 6215ZZ.
- 6215: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 62 series
The workhorse. Electric motors, pumps, gearboxes, conveyor rollers, anything with a moderate load and real speed. If you pull a bearing off a motor and it's metric, it's probably a 62 or a 63.
2RS keeps dirt out and grease in, but runs warmer and slower. ZZ shields run cooler but let fine dust through. Dirty or wet: 2RS. Fast and clean: ZZ or open with oil.
Motors usually want C3 clearance. The rotor heats up and grows; a CN bearing can run tight and die early.
Same bore, different size
One size up or down
Every bearing 75 × 130 × 25 mm: 75 × 130 × 25 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.