6216 bearing: 80 × 140 × 26 mm
Bearings › 6216
A 6216 is a deep groove ball bearing, 80 mm bore, 140 mm outside diameter, 26 mm wide. Variants: 6216-2RS (rubber sealed), 6216-ZZ (metal shields), 6216 open.
| Bore | 80 mm |
|---|---|
| Outside diameter (OD) | 140 mm |
| Width | 26 mm |
| Dynamic load rating C | 72.8 kN |
| Static load rating C0 | 55 kN |
| Limiting speed | 6 000 r/min |
| Weight | 1.43 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6216. Limiting speed as SKF gives it.
Open 6216 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
2 | Light series |
16 | Bore 16 × 5 = 80 mm |
Ask for
- 6216-2RS: rubber sealed both sides. Other brands: SKF 6216-2RSH, FAG 6216-2RSR, NSK 6216DDU, NTN 6216LLU, Koyo 6216-2RS.
- 6216-ZZ: metal shields both sides. Other brands: SKF 6216-2Z, FAG 6216-2ZR, NSK 6216ZZ, NTN 6216ZZ, Koyo 6216ZZ.
- 6216: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 62 series
The workhorse. Electric motors, pumps, gearboxes, conveyor rollers, anything with a moderate load and real speed. If you pull a bearing off a motor and it's metric, it's probably a 62 or a 63.
2RS keeps dirt out and grease in, but runs warmer and slower. ZZ shields run cooler but let fine dust through. Dirty or wet: 2RS. Fast and clean: ZZ or open with oil.
Motors usually want C3 clearance. The rotor heats up and grows; a CN bearing can run tight and die early.
Same bore, different size
One size up or down
Every bearing 80 × 140 × 26 mm: 80 × 140 × 26 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.