6016 bearing: 80 × 125 × 22 mm
Bearings › 6016
A 6016 is a deep groove ball bearing, 80 mm bore, 125 mm outside diameter, 22 mm wide. Variants: 6016-2RS (rubber sealed), 6016-ZZ (metal shields), 6016 open.
| Bore | 80 mm |
|---|---|
| Outside diameter (OD) | 125 mm |
| Width | 22 mm |
| Dynamic load rating C | 49.4 kN |
| Static load rating C0 | 40 kN |
| Limiting speed | 7 000 r/min |
| Weight | 0.85 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6016. Limiting speed as SKF gives it.
Open 6016 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
0 | Extra-light series |
16 | Bore 16 × 5 = 80 mm |
Ask for
- 6016-2RS: rubber sealed both sides. Other brands: SKF 6016-2RSH, FAG 6016-2RSR, NSK 6016DDU, NTN 6016LLU, Koyo 6016-2RS.
- 6016-ZZ: metal shields both sides. Other brands: SKF 6016-2Z, FAG 6016-2ZR, NSK 6016ZZ, NTN 6016ZZ, Koyo 6016ZZ.
- 6016: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 60 series
Same bore as the 62, but thinner. A smaller OD and narrower. Used where there's no room: gearbox layshafts, small rollers, fans, power tools.
Lighter load than a 62. Don't swap a 60 into a 62's place with a sleeve to make it fit; it'll fail long before the 62 would.
Same bore, different size
One size up or down
Every bearing 80 × 125 × 22 mm: 80 × 125 × 22 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.