6014 bearing: 70 × 110 × 20 mm
Bearings › 6014
A 6014 is a deep groove ball bearing, 70 mm bore, 110 mm outside diameter, 20 mm wide. Variants: 6014-2RS (rubber sealed), 6014-ZZ (metal shields), 6014 open.
| Bore | 70 mm |
|---|---|
| Outside diameter (OD) | 110 mm |
| Width | 20 mm |
| Dynamic load rating C | 39.7 kN |
| Static load rating C0 | 31 kN |
| Limiting speed | 8 000 r/min |
| Weight | 0.597 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6014. Limiting speed as SKF gives it.
Open 6014 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
0 | Extra-light series |
14 | Bore 14 × 5 = 70 mm |
Ask for
- 6014-2RS: rubber sealed both sides. Other brands: SKF 6014-2RSH, FAG 6014-2RSR, NSK 6014DDU, NTN 6014LLU, Koyo 6014-2RS.
- 6014-ZZ: metal shields both sides. Other brands: SKF 6014-2Z, FAG 6014-2ZR, NSK 6014ZZ, NTN 6014ZZ, Koyo 6014ZZ.
- 6014: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 60 series
Same bore as the 62, but thinner. A smaller OD and narrower. Used where there's no room: gearbox layshafts, small rollers, fans, power tools.
Lighter load than a 62. Don't swap a 60 into a 62's place with a sleeve to make it fit; it'll fail long before the 62 would.
Same bore, different size
One size up or down
Every bearing 70 × 110 × 20 mm: 70 × 110 × 20 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.