6013 bearing: 65 × 100 × 18 mm
Bearings › 6013
A 6013 is a deep groove ball bearing, 65 mm bore, 100 mm outside diameter, 18 mm wide. Variants: 6013-2RS (rubber sealed), 6013-ZZ (metal shields), 6013 open.
| Bore | 65 mm |
|---|---|
| Outside diameter (OD) | 100 mm |
| Width | 18 mm |
| Dynamic load rating C | 31.9 kN |
| Static load rating C0 | 25 kN |
| Limiting speed | 9 000 r/min |
| Weight | 0.427 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6013. Limiting speed as SKF gives it.
Open 6013 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
0 | Extra-light series |
13 | Bore 13 × 5 = 65 mm |
Ask for
- 6013-2RS: rubber sealed both sides. Other brands: SKF 6013-2RSH, FAG 6013-2RSR, NSK 6013DDU, NTN 6013LLU, Koyo 6013-2RS.
- 6013-ZZ: metal shields both sides. Other brands: SKF 6013-2Z, FAG 6013-2ZR, NSK 6013ZZ, NTN 6013ZZ, Koyo 6013ZZ.
- 6013: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 60 series
Same bore as the 62, but thinner. A smaller OD and narrower. Used where there's no room: gearbox layshafts, small rollers, fans, power tools.
Lighter load than a 62. Don't swap a 60 into a 62's place with a sleeve to make it fit; it'll fail long before the 62 would.
Same bore, different size
One size up or down
Every bearing 65 × 100 × 18 mm: 65 × 100 × 18 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.