6012 bearing: 60 × 95 × 18 mm
Bearings › 6012
A 6012 is a deep groove ball bearing, 60 mm bore, 95 mm outside diameter, 18 mm wide. Variants: 6012-2RS (rubber sealed), 6012-ZZ (metal shields), 6012 open.
| Bore | 60 mm |
|---|---|
| Outside diameter (OD) | 95 mm |
| Width | 18 mm |
| Dynamic load rating C | 30.7 kN |
| Static load rating C0 | 23.2 kN |
| Limiting speed | 9 500 r/min |
| Weight | 0.395 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6012. Limiting speed as SKF gives it.
Open 6012 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
0 | Extra-light series |
12 | Bore 12 × 5 = 60 mm |
Ask for
- 6012-2RS: rubber sealed both sides. Other brands: SKF 6012-2RSH, FAG 6012-2RSR, NSK 6012DDU, NTN 6012LLU, Koyo 6012-2RS.
- 6012-ZZ: metal shields both sides. Other brands: SKF 6012-2Z, FAG 6012-2ZR, NSK 6012ZZ, NTN 6012ZZ, Koyo 6012ZZ.
- 6012: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 60 series
Same bore as the 62, but thinner. A smaller OD and narrower. Used where there's no room: gearbox layshafts, small rollers, fans, power tools.
Lighter load than a 62. Don't swap a 60 into a 62's place with a sleeve to make it fit; it'll fail long before the 62 would.
Same bore, different size
One size up or down
Every bearing 60 × 95 × 18 mm: 60 × 95 × 18 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.