6000 bearing: 10 × 26 × 8 mm
Bearings › 6000
A 6000 is a deep groove ball bearing, 10 mm bore, 26 mm outside diameter, 8 mm wide. Variants: 6000-2RS (rubber sealed), 6000-ZZ (metal shields), 6000 open.
| Bore | 10 mm |
|---|---|
| Outside diameter (OD) | 26 mm |
| Width | 8 mm |
| Dynamic load rating C | 4.75 kN |
| Static load rating C0 | 1.96 kN |
| Limiting speed | 40 000 r/min |
| Weight | 0.0178 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6000. Limiting speed as SKF gives it.
Open 6000 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
0 | Extra-light series |
00 | Bore code 00 = 10 mm |
Ask for
- 6000-2RS: rubber sealed both sides. Other brands: SKF 6000-2RSH, FAG 6000-2RSR, NSK 6000DDU, NTN 6000LLU, Koyo 6000-2RS.
- 6000-ZZ: metal shields both sides. Other brands: SKF 6000-2Z, FAG 6000-2ZR, NSK 6000ZZ, NTN 6000ZZ, Koyo 6000ZZ.
- 6000: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 60 series
Same bore as the 62, but thinner. A smaller OD and narrower. Used where there's no room: gearbox layshafts, small rollers, fans, power tools.
Lighter load than a 62. Don't swap a 60 into a 62's place with a sleeve to make it fit; it'll fail long before the 62 would.
Same bore, different size
One size up or down
- 600112 × 28 × 8 (up)
Every bearing 10 × 26 × 8 mm: 10 × 26 × 8 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.