Tr32×6 thread: 32 × 6 mm
Threads › Tr32×6
Tr32×6 is a Trapezoidal (Tr) thread: 32 mm major diameter, 6 mm pitch, 30° form.
| Standard | Trapezoidal (Tr) |
|---|---|
| Major diameter | 32 mm |
| Pitch | 6 mm |
| Thread angle | 30° |
| Minor diameter, bolt | 25.5 mm |
| Minor diameter, nut | 26 mm |
| Tap drill | Not listed. Check your tap maker's chart. |
| Usual class | 7e bolt, 7H nut |
Minor diameters worked out from the basic profile: major Ø − pitch − 0.5 mm (bolt) and major Ø − pitch (nut).
Open Tr32×6 in BenchsmithAdd to order list
Measure it
Bolt: Measure across the crests of the bolt with the caliper jaws. Worn bolts read 0.1 to 0.3 under.
Nut or tapped hole: Measure across the tops of the threads inside the nut or hole with the inside jaws. That is the minor Ø. Worn or oversize holes read a little over.
Close in size, won't mate
- 1-1/4-7 UNCØ31.75 mm, 7 TPI
- 1-1/4-12 UNFØ31.75 mm, 12 TPI
- 1-1/4 BSWØ31.75 mm, 7 TPI
- 1-1/4-5 ACMEØ31.75 mm, 5 TPI
- M33Ø33 mm, 3.5 mm pitch
- M33×2Ø33 mm, 2 mm pitch
One size up or down
Got a bolt and no idea what it is? Measure the outside Ø and type it into Benchsmith → Find → Thread.