Tr14×3 thread: 14 × 3 mm
Threads › Tr14×3
Tr14×3 is a Trapezoidal (Tr) thread: 14 mm major diameter, 3 mm pitch, 30° form.
| Standard | Trapezoidal (Tr) |
|---|---|
| Major diameter | 14 mm |
| Pitch | 3 mm |
| Thread angle | 30° |
| Minor diameter, bolt | 10.5 mm |
| Minor diameter, nut | 11 mm |
| Tap drill | Not listed. Check your tap maker's chart. |
| Usual class | 7e bolt, 7H nut |
Minor diameters worked out from the basic profile: major Ø − pitch − 0.5 mm (bolt) and major Ø − pitch (nut).
Open Tr14×3 in BenchsmithAdd to order list
Measure it
Bolt: Measure across the crests of the bolt with the caliper jaws. Worn bolts read 0.1 to 0.3 under.
Nut or tapped hole: Measure across the tops of the threads inside the nut or hole with the inside jaws. That is the minor Ø. Worn or oversize holes read a little over.
Close in size, won't mate
- M14Ø14 mm, 2 mm pitch
- M14×1.5Ø14 mm, 1.5 mm pitch
- 1/4-18 NPTØ13.72 mm, 18 TPI
- 9/16-12 UNCØ14.29 mm, 12 TPI
- 9/16-18 UNFØ14.29 mm, 18 TPI
- 9/16 BSWØ14.29 mm, 12 TPI
One size up or down
Got a bolt and no idea what it is? Measure the outside Ø and type it into Benchsmith → Find → Thread.