R2 thread: 59.61 mm × 11 TPI
Threads › R2
R2 is a BSPT taper (R / Rc) thread: 59.61 mm major diameter, 11 TPI (2.309 mm pitch), 55° form. Tap drill 56 mm. Taper thread: the Ø changes along the length, measure near the start.
| Standard | BSPT taper (R / Rc) |
|---|---|
| Major diameter | 59.614 mm (2.347″) |
| Pitch | 11 TPI (2.309 mm) |
| Thread angle | 55° |
| Tap drill | 56 mm |
Open R2 in BenchsmithAdd to order list
Measure it
Bolt: Measure across the crests of the bolt with the caliper jaws. Worn bolts read 0.1 to 0.3 under.
Nut or tapped hole: Measure across the tops of the threads inside the nut or hole with the inside jaws. That is the minor Ø. Worn or oversize holes read a little over.
Close in size, won't mate
- G2Ø59.61 mm, 11 TPI
- M60Ø60 mm, 5.5 mm pitch
- M60×4Ø60 mm, 4 mm pitch
- Tr60×9Ø60 mm, 9 mm pitch
- 2-11.5 NPTØ60.33 mm, 11.5 TPI
One size up or down
- R1-1/2Ø47.8 mm (down)
Got a bolt and no idea what it is? Measure the outside Ø and type it into Benchsmith → Find → Thread.