1/4-28 UNF thread: 6.35 mm × 28 TPI
Threads › 1/4-28 UNF
1/4-28 UNF is a UNF thread: 6.35 mm major diameter, 28 TPI (0.907 mm pitch), 60° form. Tap drill 5.5 mm.
| Standard | UNF |
|---|---|
| Major diameter | 6.35 mm (0.25″) |
| Pitch | 28 TPI (0.907 mm) |
| Thread angle | 60° |
| Minor diameter, bolt | 5.24 mm |
| Minor diameter, nut | 5.37 mm |
| Tap drill | 5.5 mm |
| Usual class | 2A bolt, 2B nut |
Minor diameters worked out from the basic profile: major Ø − 1.22687 × pitch (bolt) and − 1.08253 × pitch (nut).
Open 1/4-28 UNF in BenchsmithAdd to order list
Measure it
Bolt: Measure across the crests of the bolt with the caliper jaws. Worn bolts read 0.1 to 0.3 under.
Nut or tapped hole: Measure across the tops of the threads inside the nut or hole with the inside jaws. That is the minor Ø. Worn or oversize holes read a little over.
Same diameter, other pitch
- 1/4-20 UNC20 TPI (1.27 mm pitch)
- 1/4 BSW20 TPI (1.27 mm pitch)
Close in size, won't mate
- 1/4-16 ACMEØ6.35 mm, 16 TPI
- M6Ø6 mm, 1 mm pitch
- M6×0.75Ø6 mm, 0.75 mm pitch
- #12-24 UNCØ5.49 mm, 24 TPI
One size up or down
- #10-32 UNFØ4.83 mm (down)
- 5/16-24 UNFØ7.94 mm (up)
Got a bolt and no idea what it is? Measure the outside Ø and type it into Benchsmith → Find → Thread.