696 bearing: 6 × 15 × 5 mm
Bearings › 696
A 696 is a deep groove ball bearing, 6 mm bore, 15 mm outside diameter, 5 mm wide. Variants: 696-2RS (rubber sealed), 696-ZZ (metal shields), 696 open.
| Bore | 6 mm |
|---|---|
| Outside diameter (OD) | 15 mm |
| Width | 5 mm |
Sizes from maker catalogues. No sourced load ratings for this one yet, so none are shown.
Open 696 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing, miniature |
9 | Size series |
6 | Bore 6 mm (under 10 mm the last digit is the bore) |
Ask for
- 696-2RS: rubber sealed both sides. Other brands: SKF 696-2RSH, FAG 696-2RSR, NSK 696DDU, NTN 696LLU, Koyo 696-2RS.
- 696-ZZ: metal shields both sides. Other brands: SKF 696-2Z, FAG 696-2ZR, NSK 696ZZ, NTN 696ZZ, Koyo 696ZZ.
- 696: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
Same bore, different size
One size up or down
Every bearing 6 × 15 × 5 mm: 6 × 15 × 5 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.