6019 bearing: 95 × 145 × 24 mm
Bearings › 6019
A 6019 is a deep groove ball bearing, 95 mm bore, 145 mm outside diameter, 24 mm wide. Variants: 6019-2RS (rubber sealed), 6019-ZZ (metal shields), 6019 open.
| Bore | 95 mm |
|---|---|
| Outside diameter (OD) | 145 mm |
| Width | 24 mm |
| Dynamic load rating C | 63.7 kN |
| Static load rating C0 | 54 kN |
| Limiting speed | 6 000 r/min |
| Weight | 1.19 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6019. Limiting speed as SKF gives it.
Open 6019 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
0 | Extra-light series |
19 | Bore 19 × 5 = 95 mm |
Ask for
- 6019-2RS: rubber sealed both sides. Other brands: SKF 6019-2RSH, FAG 6019-2RSR, NSK 6019DDU, NTN 6019LLU, Koyo 6019-2RS.
- 6019-ZZ: metal shields both sides. Other brands: SKF 6019-2Z, FAG 6019-2ZR, NSK 6019ZZ, NTN 6019ZZ, Koyo 6019ZZ.
- 6019: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 60 series
Same bore as the 62, but thinner. A smaller OD and narrower. Used where there's no room: gearbox layshafts, small rollers, fans, power tools.
Lighter load than a 62. Don't swap a 60 into a 62's place with a sleeve to make it fit; it'll fail long before the 62 would.
Same bore, different size
- 621995 × 170 × 32
One size up or down
Every bearing 95 × 145 × 24 mm: 95 × 145 × 24 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.