6010 bearing: 50 × 80 × 16 mm
Bearings › 6010
A 6010 is a deep groove ball bearing, 50 mm bore, 80 mm outside diameter, 16 mm wide. Variants: 6010-2RS (rubber sealed), 6010-ZZ (metal shields), 6010 open.
| Bore | 50 mm |
|---|---|
| Outside diameter (OD) | 80 mm |
| Width | 16 mm |
| Dynamic load rating C | 22.9 kN |
| Static load rating C0 | 16 kN |
| Limiting speed | 11 000 r/min |
| Weight | 0.255 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6010. Limiting speed as SKF gives it.
Open 6010 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
0 | Extra-light series |
10 | Bore 10 × 5 = 50 mm |
Ask for
- 6010-2RS: rubber sealed both sides. Other brands: SKF 6010-2RSH, FAG 6010-2RSR, NSK 6010DDU, NTN 6010LLU, Koyo 6010-2RS.
- 6010-ZZ: metal shields both sides. Other brands: SKF 6010-2Z, FAG 6010-2ZR, NSK 6010ZZ, NTN 6010ZZ, Koyo 6010ZZ.
- 6010: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 60 series
Same bore as the 62, but thinner. A smaller OD and narrower. Used where there's no room: gearbox layshafts, small rollers, fans, power tools.
Lighter load than a 62. Don't swap a 60 into a 62's place with a sleeve to make it fit; it'll fail long before the 62 would.
Same bore, different size
One size up or down
Every bearing 50 × 80 × 16 mm: 50 × 80 × 16 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.