6007 bearing: 35 × 62 × 14 mm
Bearings › 6007
A 6007 is a deep groove ball bearing, 35 mm bore, 62 mm outside diameter, 14 mm wide. Variants: 6007-2RS (rubber sealed), 6007-ZZ (metal shields), 6007 open.
| Bore | 35 mm |
|---|---|
| Outside diameter (OD) | 62 mm |
| Width | 14 mm |
| Dynamic load rating C | 16.8 kN |
| Static load rating C0 | 10.2 kN |
| Limiting speed | 15 000 r/min |
| Weight | 0.148 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6007. Limiting speed as SKF gives it.
Open 6007 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
0 | Extra-light series |
07 | Bore 07 × 5 = 35 mm |
Ask for
- 6007-2RS: rubber sealed both sides. Other brands: SKF 6007-2RSH, FAG 6007-2RSR, NSK 6007DDU, NTN 6007LLU, Koyo 6007-2RS.
- 6007-ZZ: metal shields both sides. Other brands: SKF 6007-2Z, FAG 6007-2ZR, NSK 6007ZZ, NTN 6007ZZ, Koyo 6007ZZ.
- 6007: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 60 series
Same bore as the 62, but thinner. A smaller OD and narrower. Used where there's no room: gearbox layshafts, small rollers, fans, power tools.
Lighter load than a 62. Don't swap a 60 into a 62's place with a sleeve to make it fit; it'll fail long before the 62 would.
Same bore, different size
One size up or down
Every bearing 35 × 62 × 14 mm: 35 × 62 × 14 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.