6002 bearing: 15 × 32 × 9 mm
Bearings › 6002
A 6002 is a deep groove ball bearing, 15 mm bore, 32 mm outside diameter, 9 mm wide. Variants: 6002-2RS (rubber sealed), 6002-ZZ (metal shields), 6002 open.
| Bore | 15 mm |
|---|---|
| Outside diameter (OD) | 32 mm |
| Width | 9 mm |
| Dynamic load rating C | 5.85 kN |
| Static load rating C0 | 2.85 kN |
| Limiting speed | 32 000 r/min |
| Weight | 0.03 kg |
Ratings and weight: SKF product page, skf.com, read 2 Oct 2026, designation 6002. Limiting speed as SKF gives it.
Open 6002 in BenchsmithAdd to order list
What the number means
6 | Deep groove ball bearing |
0 | Extra-light series |
02 | Bore code 02 = 15 mm |
Ask for
- 6002-2RS: rubber sealed both sides. Other brands: SKF 6002-2RSH, FAG 6002-2RSR, NSK 6002DDU, NTN 6002LLU, Koyo 6002-2RS.
- 6002-ZZ: metal shields both sides. Other brands: SKF 6002-2Z, FAG 6002-2ZR, NSK 6002ZZ, NTN 6002ZZ, Koyo 6002ZZ.
- 6002: open, no seals or shields.
Add C3 for electric motors and anything that runs hot.
About the 60 series
Same bore as the 62, but thinner. A smaller OD and narrower. Used where there's no room: gearbox layshafts, small rollers, fans, power tools.
Lighter load than a 62. Don't swap a 60 into a 62's place with a sleeve to make it fit; it'll fail long before the 62 would.
Same bore, different size
One size up or down
Every bearing 15 × 32 × 9 mm: 15 × 32 × 9 mm bearings. Measured a bearing with no number on it? Type the bore, OD and width into Benchsmith → Find → Bearing.